Skip to main content
MicrophoneTest.inOnline Audio Diagnostics
Diagnostic Tree

Microphone Not Working?

Microphone not working on your computer or phone? Use our interactive diagnostic tree to track down where the audio signal stops—from blocked permissions and muted hardware to driver conflicts.

Interactive audio diagnostic toolमाइक काम नहीं कर रहा?

Interactive Diagnostic Flow

01 HARDWARE02 PERMISSION03 SIGNAL04 VOLUME05 DIAGNOSIS
01 Hardware Check

Is your physical microphone or headset plugged in and unmuted?

Check physical inline mute switches on your headset wire and USB audio interface power LEDs.

Live Microphone Audio Signal Check

Verify that your microphone is receiving and streaming audio data directly in your browser.

Client-Side Test
Verify Input for Microphone Not Working?Mode: general
Hardware Idle
Default System Microphone (Click "Test My Mic" to inspect audio hardware)
Oscilloscope Frequency / Waveform Analysis48000 Hz
STANDBY
Live Input Level
Peak: -60 dBFS-60 dBFS
-60 dBFS-45 dB-30 dB-18 dB-6 dB0 dB (Clip)
Signal State
None
Input Level
0%
Noise Floor
Calibrate below
Clipping
None detected
Recording
Standby
Permission
Prompt on click
Background Noise & Room Calibration
Noise Floor: Uncalibrated

Measures the acoustic room silence, PC fan hum, and electrical interference when you are not speaking. Stay silent for 3 seconds to measure your baseline noise floor.

Audio Sample Recording Test
Duration: 00:00

Record a 5-second sample to verify voice clarity, playback volume, and background noise.

🔒 Audio data stays in local browser memory and is never uploaded.Client-side MediaRecorder
Browser will ask for microphone permission. Audio is processed locally.
Zero Audio Uploads
Engine: WebAudio AnalyserNodeFFT Size: 2048Smoothing: 0.65Context: Suspended
Relative Digital dBFS (0 dBFS = Digital Full Scale)
Bilingual Help • द्विभाषी गाइडEnglish + हिंदी

माइक की समस्या हल करने के आसान उपाय (Troubleshooting Steps)

यदि आपका माइक काम नहीं कर रहा, आवाज़ धीमी है या गूंज रही है:

Hindi Support

Hardware Mute Switch Check

हेडफ़ोन पर लगा म्यूट स्विच देखें

Inspect your headset cable or earphone inline control for a physical mute toggle or volume wheel turned down.

अपने ईयरफ़ोन या हेडसेट के तार पर देखें कि कोई फिजिकल म्यूट (Mute) बटन तो ऑन नहीं है या वॉल्यूम व्हील कम तो नहीं है।

Browser Permission Unlock

ब्राउज़र में माइक परमिशन चालू करें

Click the lock or tune icon next to the website address in Chrome or Safari, switch Microphone to "Allow", and reload.

वेबसाइट के लिंक (URL) के पास बने लॉक (🔒) आइकन पर क्लिक करें और Microphone को “Allow” करके पेज रीफ़्रेश करें।

System Input Gain Adjustment

कंप्यूटर या लैपटॉप में इनपुट वॉल्यूम बढ़ाएं

Open Windows Settings → Sound or macOS System Settings → Sound → Input and set the input level slider to 85%–90%.

Windows की Sound Settings या Mac की Sound Input Settings में जाकर माइक्रोफ़ोन वॉल्यूम को 85% से 90% पर सेट करें।

Acoustic Testing Lab Verification & Technical Specifications

Audited by MicrophoneTest.in DSP Engineering Team • Verified for Microphone Not Working?

Active W3C StandardRev. 2026.09
Processing Pipeline

Client-Side Web Audio API

W3C AudioContext & AnalyserNode

Sample Rates & Depth

44.1 kHz / 48.0 kHz

32-bit Float Internal Processing

Measurement Standards

Digital Full Scale (dBFS)

Target Speech: -24 to -12 dBFS

Privacy & Data Security

Zero Server Transmission

100% In-Memory Local Pipeline

Hardware Interaction: Directly queries host OS audio drivers (DirectSound, CoreAudio, ALSA, AAudio) via browser navigator.mediaDevices.getUserMedia().
Instant Lifecycle Teardown: Releasing the microphone stops all audio tracks immediately, switching off the browser and hardware privacy LED lights with zero persistent background capture.

Systematic Step-by-Step Diagnostic Protocol

When a microphone fails, the issue almost always stems from one of four checkpoints in the audio pipeline:

1. Physical Hardware & Connection: Unplugged cables, broken TRRS jacks, or physical mute toggles.

2. Operating System Permissions: Windows 11 Privacy toggles or macOS System Settings blocking app access.

3. Device Selection: The system default is routed to an inactive virtual cable or disconnected Bluetooth device.

4. Browser Site Permissions: Chrome, Safari, or Firefox blocking site access to mediaDevices.

Microphone Problem Diagnostic Matrix

Identify your symptom in the left column and execute the corresponding solution step:

SymptomMost Likely CauseWhat to InspectRecommended Fix
Tester shows "Blocked" errorBrowser site permission deniedURL address bar padlock iconChange permission to "Allow" and reload.
Meter flatlines at -60 dBFSHardware mute or wrong deviceHeadset cord switch & OS input selectorUnmute switch; select correct microphone.
Works in Zoom but not in browserExclusive mode or browser privacyWindows Sound Control Panel exclusive lockDisable "Allow applications to take exclusive control".
Audio works for 2 seconds then diesAggressive noise suppression / driver crashRealtek / Waves MaxxAudio softwareDisable audio enhancements in sound settings.

Frequently Asked Questions

Q.How do I know if my microphone is physically broken?

Plug the microphone into a different computer or a smartphone. If it fails to register on multiple independent devices, the internal capsule or cable is damaged.

Q.Why does Windows say "No input devices found"?

This usually indicates a missing audio driver. Open Windows Device Manager, expand "Audio inputs and outputs", right-click your microphone, and select "Update driver".

Contextual checks and operating system instructions related to your test.

Audio Diagnostic Directory• सम्पूर्ण ऑडियो गाइड एवं टूल्स

Explore All Microphone Tests, Guides & Fixes

Comprehensive interlinked diagnostics for microphones, operating systems, browsers, and conference applications. Select any test or guide to begin: